Tutorials
Hang Art on Any Wall with These Picture-Perfect Tips
Apr
So you’ve finally found the perfect piece of art for your space. Now what? Sure, you can take a hammer and nail to the wall and hope for the best. But achieving that gallery-worthy display will take a bit more effort. You’ll need to get it precisely level, mount it at the right height, and (perhaps most importantly) make sure it’s secured properly to the wall. With so many factors to consider, hanging large-scale artwork can be a tricky process, but with the right techniques, it’s easier than it looks. These tips for hanging art will have you mounting pictures with confidence.
Tips for Hanging Art
Before you start hanging artwork, you should know the weight of each item first to help you decide on the best strategy. Check the packaging on the nails, hanging hooks, or wall anchors you intend to use to ensure the hardware will be able to safely support the frame.
Gather Supplies for Hanging Art
Although the exact hanging technique to use will depend on the weight of your piece, here are some supplies you may need:
- Measuring tape
- Pencil
- Level
- Painter’s tape
- Nails or picture-hanging hooks
- Hammer
- Stud finder
- Wall anchors
- Screwdriver or drill
Decide How High to Hang Art
To find the correct height for your artwork, refer to the golden rule of hanging art: The center of the piece should be about 57 inches off the floor. That’s roughly eye-level for the average adult and the height most art galleries and museums use when mounting artwork. For a gallery wall, the center of the arrangement should be at that height. To determine where to place your hardware, measure and mark 57 inches from the floor with a pencil. Then, measure the distance from where the nail will catch on the back of the art frame (a sawtooth hanger or metal loop, for example) to the middle of the piece. Mark that difference from your 57-inch mark on the wall; that’s where your nail or wall anchor should go.
Make Your Artwork Level
Ensuring your art display is level is also essential to a professional-looking display. First, measure and mark where the top of the frame will end up on the wall. Use a level to determine an even placement, and mark it with a line of painter’s tape to use as a guide when you hang the art.
How to Hang Art on Drywall
Hanging art on drywall is fairly straightforward. If you’re not sure whether your walls are drywall or plaster, try pushing a pin or thumbtack into the wall. If it goes through, you’re dealing with drywall. Because plaster is a much harder surface, you likely won’t be able to push the pin through.
For Artwork Weighing 5 Pounds or Less:
For relatively lightweight art, a simple nail should suffice. Adhesive picture-hanging strips (such as 3M Command strips) also work well, and metal picture-hanging hooks (which combine an angled nail and a hook) are another alternative that offers a stronger hold and easy installation. Hold the hanger by the hook and hammer the nail into the wall; then use the hook to hang the frame. A padded back prevents scrapes and scratches on your wall.
For Heavy Artwork:
Mount heavier pieces with specialty curved hooks that use the weight of the art to keep the hook in place. To install these hooks, simply use your hands to push the long end straight into the drywall, twisting upward until it rests against the other side of the wall and only the small hooked end is showing. Mount the art on the hook using the hanging hardware or wire on the back of the frame.
Framed art that’s heavier than 20 pounds may need additional reinforcement. Use a stud finder to locate a stud behind the wall and secure your hanging hardware of choice into it for a more secure hold. Drywall anchors are another easy-install option that can better support heavy wall art. Choose wall anchors that are heavy-duty enough to support the weight of your artwork. Press the anchor’s tip against the wall and use a screwdriver to screw it in until it’s flush with the surface. Place a screw inside the anchor and tighten with the screwdriver. The anchor will split and grip the back of the drywall to lock it in place. Use the screw head to hang the frame from its hook or hanger.